top button

Led Flood Light Manufacturers Share Maintenance Steps For Led Street Lights

0 votes
5 views

LED street lights have many advantages. They are efficient, energy-saving, environmentally friendly, long-lived, and fast-responding. Therefore, many urban lighting projects have replaced traditional street lights with LED street lights, which saves time and effort. If you want LED street lights to have a long service life, we must have regular maintenance. Let's take a look at how to repair properly with the Led Flood Light manufacturer:

1. Periodic inspection of the lamp head of the LED street light
First of all, we have to check the lamp head of the LED street lamp step by step to see if the lamp head is damaged or if there is any problem with the lamp bead. Some LED street lights often don't light or the light is dark, most of the possibilities are because the lamp beads are damaged. The lamp beads are a series of strings connected in series, and then the multiple strings of beads are connected in parallel. If one lamp bead is broken, then the string of beads cannot be used; if a whole string of beads is broken, then All the lamp beads of this lamp can not be used. Therefore, we should always check the lamp beads to see if the lamp beads are burnt, or check the surface of the lamp head for damage.

2. Check the charge and discharge of the battery
Many LED street lights are equipped with batteries. In order to make the batteries last longer, we have to check them frequently. Mainly check the discharge of the battery to see if the battery has normal charge and discharge. Sometimes we also need to check the electrodes or wiring of the LED street lamp for signs of corrosion, if any, to deal with it as soon as possible to avoid bigger problems.

3. Check the lamp body of the LED street light
The LED body of the LED street lamp is also very worthy of attention. It is necessary to always check whether the lamp body has serious damage or leakage. No matter what kind of situation occurs, it should be dealt with as soon as possible, especially the leakage phenomenon, the first time to deal with, to avoid the occurrence of electric shock accidents.

4, check the condition of the controller
LED street lights are wind and rain outdoors, so we should check whether there is damage or water in the LED street light controller during heavy winds and heavy rains. There are a few such cases, but they should be dealt with in a timely manner if they are discovered. Only by checking frequently can LED street lights be used for a longer period of time.

5. Check if the battery has water content.
Finally, LED street lights with batteries, we must always pay attention to the battery. For example, is the battery stolen, or the battery has no water. Because of the heavy wind and heavy rain, LED street lights are not covered for many years, so frequent inspection can guarantee the service life of the battery.

 

information about Led Flood Light : https://www.xiangruilight.com/

 

posted Sep 18 by Beta Cpc

  Promote This Blog
Facebook Share Button Twitter Share Button Google+ Share Button LinkedIn Share Button Multiple Social Share Button

Related Blogs
0 votes

The development of the city has driven the development of some industries. The development of new energy has accelerated the development of LED technology. Therefore, LED street lights have gradually entered the mainstream of street lamps. How to choose LED street lights?

The following 100w Led Flood light manufacturers will elaborate on the aspects of light efficiency, life and beauty.

1, light efficiency: the same wattage of LED street lights, because of their different light distribution conditions, will also achieve different effects in brightness. At the same time, because of the light decay of the LED light source caused by the driving circuit, the LED light of the LED street light is insufficient.

2, life: LED lamps because of its different lighting principles, its service life far exceeds the traditional lamps. Therefore, the illuminator itself does not affect the life of the entire LED street lamp. At present, the service life of LED lamps itself can reach more than 50,000 hours. The battery part that ultimately affects the service life of LED street lights. The use of high quality batteries can greatly extend the life of street lamps. At the same time, the entire system configuration is scientifically designed to avoid overcharging or overdischarging of the battery, and also to extend the service life of the battery. In the case of ensuring the quality of the battery, the scientific configuration is adopted in the design of the entire street lamp system, which greatly prolongs the service life. Generally speaking, it can be guaranteed to be used normally for 3-5 years or more.

3, beautiful: the appearance of street lamps is beautiful and ugly, not only related to the beauty and ugliness of a road, but also reflects the spiritual outlook of a city. Our company contributes to many urban roads, letting those beautiful street lamps illuminate the people in the city and lead the way.

 

 

information about 100w Led Flood light : https://www.xiangruilight.com/product/flood-light-mars-series/100w-outdoor-slim-led-floodlight-ip65-mars-series.html

0 votes

Today, with the manufacturer, what are the advantages of LED lamps better than high-pressure sodium lamps?

First, unidirectional light
The characteristics of the LED lamp itself - the unidirectional nature of light, without the diffusion of light, to ensure light efficiency.

Second, high light efficiency
The LED lamp has a unique secondary optical design that illuminates the area of ​​the desired illumination with the LED light, further improving the illumination efficiency. Energy saving has been achieved. At present, the light source efficiency of LED has reached 100lm/w, and there is still a lot of room for development, the theoretical value reaches 200lm/w. The luminous efficiency of the high-pressure sodium lamp increases with the increase of power. Therefore, the overall efficacy LED lamp is stronger than the high-pressure sodium lamp.

Third, high color rendering
The color rendering of LED lamps is much higher than that of high-pressure sodium lamps. The color rendering index of high-pressure sodium lamps is only about 23, and the color rendering index of LED lamps reaches 70 or more. From the perspective of visual psychology, the same brightness can be achieved, and the illuminance of LED lamps can be higher than that of high voltage. The sodium lamp has been reduced.

Fourth, the light decay is small
The light decay of LED lights is small, the light decay of less than 3% in one year, and the high-pressure sodium light decays, which has dropped by more than 30% in a year or so. Therefore, the design of LED lamps can be lower than that of high-pressure sodium lamps.

Five, energy saving
The LED lamp has an automatic control energy-saving device, which can achieve the maximum possible power reduction and save energy in meeting the lighting requirements of different time periods. Use is relatively safe. LEDs are low-voltage devices that drive a single LED with a safe voltage. The series has a single power of 1 watt, so it is a safer power source than a high-voltage power supply, making it ideal for use in public places.

Six, easy to maintain
Each unit LED chip has a small volume, so it can be fabricated into a variety of shapes and suitable for a variable environment.

 

information about 100w Led Flood light : https://www.xiangruilight.com/product/flood-light-mars-series/100w-outdoor-slim-led-floodlight-ip65-mars-series.html

0 votes

Today, 200w Led Flood light manufacturers share the right design for outdoor lighting.

Many people think that the brighter the outdoor lighting, the better the outdoor lighting. But in fact, it's not. The light that highlights trees, shrubs, and flower beds is not as much as you think, with a maximum of 1000 lumens. Larger luminaires with brighter outputs are more suitable for illuminating the entrance or the entire lawn.

Be sure to evenly separate the lights, not too far and not too close. Installing the light too far can result in dark areas and shadows throughout the lighting design. Putting them too close can result in unnecessary glare and over-bright areas. Uniform illumination is not only important in aesthetics, but also in terms of safety. Bright or dark spots or high contrast areas may make nights harder to see, especially the camera.

If you use the remote control on an LED floodlight, you may encounter some problems that will always work perfectly. Radio frequency (RF) remotes can be operated from walls and furniture, but if they are at the same frequency as nearby electronic equipment, they can be disturbed. Infrared (IR) remotes do not have to deal with electrical interference, but they do not work through the wall and must have a line of sight with the luminaire.

information about 200w Led Flood light : https://www.xiangruilight.com/product/flood-light-mars-series/high-power-200w-outdoor-slim-led-floodlight-ip65-mars-series.html

0 votes

LED floodlights are common products of the current types of lamps, and their use environment is also very diverse. The advantages of LED floodlights are many, so today, manufacturers will share the LED floodlights. One advantage.

1, the lamp body is very small
The LED lamp is a small, very fine LED chip packaged in a transparent epoxy resin, so it is very small, very lightweight, saving a lot of materials and space in production and application.

2, energy consumption is very low
It consumes no more than 0.1W of electricity, consumes more than 90% less energy than incandescent lamps of the same efficacy, and more than 70% less than energy-saving lamps. Therefore, only LED is a true energy-saving light source!

3, sturdy and durable
The LED wafer is completely encapsulated in epoxy. The small epoxy resin particles are extremely difficult to break, and the entire lamp body has no loose parts; the inner wafer is extremely difficult to break, and there is little thermal effect, which may volatilize and melt. These characteristics make the LED difficult to damage. Compared with ordinary light bulbs, fluorescent lamps and LEDs can be said to be solid and sturdy, and they are numerous and durable.

4, LED lamp has a long service life
At the right current and voltage, the life of the LED lamp can reach 100,000 hours, which means that the product life is theoretically more than 10 years, which has a longer service life than other types of lamps.

5, a wide range of applications
Due to its small size, each unit LED chip is 3~5mm square or round, so it is more suitable for the preparation of devices with complicated modeling process. For example, the manufacture of soft, flexible tubes, strips, and shaped lights is currently only suitable for LEDs.

6, more colorful
In the past, the color of the lamps on the market was very simple. To achieve the purpose of color, one was to paint or cover the colored surface on the surface of the lamp, and the other was to charge the lamp with inert gas, so the richness of color was limited. LED is digital control, the light-emitting chip can now emit a variety of colors, including red, green, blue three-color, it is with this three-color, through the system control, you can restore the colorful world of the world.

7, less heat dissipation
LED is a more advanced cold light source. It does not radiate a lot of infrared rays and ultraviolet rays like incandescent lamps and fluorescent lamps. It is especially suitable for the illumination of valuables such as cultural relics, jewellery and high-end cosmetics. There is almost no current thermal effect like an incandescent lamp, and it is not subject to thermal expansion and contraction and frothing. It will not make the bulb yellow, will not accelerate the aging of the luminaire, and will not constitute a greenhouse effect on the surrounding environment.

information about 200w Led Flood light : https://www.xiangruilight.com/product/flood-light-mars-series/high-power-200w-outdoor-slim-led-floodlight-ip65-mars-series.html

...