top button

China Led Flood Light Factory Shares The Considerations For The Installation Of Led Line Lights

0 votes
1 view


With the current lifestyle change, in order to beautify the city, but also to facilitate people who travel outside at night, know the road signs, so now there will be work on lighting projects, especially in some hotels, office buildings, big summer, and other places, Lighting projects are absolutely indispensable. So today China Led Flood Light Factory will share the common LED line lights in the outdoor, its installation method.

1. Wiring method
The general voltage of led line lamp is AC220V, DC12V, DC24V. Therefore, it is necessary to select a suitable switching power supply. The size of the power supply is determined according to the power and connection length of the LED light bar. It should be noted that DC12V and DC24V should not be connected to AC220V, otherwise the lamp beads will burn out. DC12V can not be connected to the DC24V control power supply; otherwise, the power will be more than doubled, and it is easy to burn out the lamp bead. AC220V lights can be directly connected to the mains. RGB colorful LED strips need to use the controller to achieve the changing effect, generally using 4 lines to distinguish between black, red, green and blue. The colorful light bars are generally common anodes, that is, one of the light bars is +12V connected to the black line, the other is the negative pole, and the RGB is connected to the corresponding red, green and blue interface or power line.

2. Connection distance
In general, the 3528 series of LED line lights, the connection distance of up to 20 meters, 5050 series of LED lights, the longest connection distance is 15 meters. If this connection distance is exceeded, the led line lamp is very prone to heat, which will affect the service life of the led line lamp during use. The RGB simple controller has a control range of 10 to 15 meters, and the remote controller has a control range of 15 to 20 meters and a maximum distance of 30 meters. If the connection distance of the led line light is long and the controller cannot control the long light strip, then a power amplifier is needed for the tapping. Therefore, it must be installed according to the manufacturer's requirements when installing.

information about Led Flood Light Factory : https://www.xiangruilight.com/

posted Aug 14 by Beta Cpc

  Promote This Blog
Facebook Share Button Twitter Share Button Google+ Share Button LinkedIn Share Button Multiple Social Share Button

Related Blogs
0 votes

Generally speaking, the illumination angle is more than 40 degrees, which is called LED floodlight. The illumination range of LED floodlight can be adjusted arbitrarily. The LED floodlight is the most widely used one in landscape lighting. So what are the main features of the 100w Led Flood light manufacturer to share LED floodlights?

1, LED floodlight shell and module adopt die-cast aluminum to ensure the safety of LED floodlight (anti-typhoon 12), LED floodlight anti-collision grade reaches IK10.

2, LED floodlight body color can choose: black, white, silver.

3, LED floodlight module design, LED floodlight radiator uses high-conductivity aviation aluminum to provide sufficient heat dissipation area for LED floodlights, so that the LED floodlight temperature rise is not higher than 30 °C.

4, LED floodlight silicone sealing ring makes the LED floodlight module radiator and lens perfectly combined, LED floodlights waterproof level can reach IP67.

information about 100w Led Flood light : https://www.xiangruilight.com/product/flood-light-mars-series/100w-outdoor-slim-led-floodlight-ip65-mars-series.html

0 votes

Today, with the manufacturer, what are the advantages of LED lamps better than high-pressure sodium lamps?

First, unidirectional light
The characteristics of the LED lamp itself - the unidirectional nature of light, without the diffusion of light, to ensure light efficiency.

Second, high light efficiency
The LED lamp has a unique secondary optical design that illuminates the area of ​​the desired illumination with the LED light, further improving the illumination efficiency. Energy saving has been achieved. At present, the light source efficiency of LED has reached 100lm/w, and there is still a lot of room for development, the theoretical value reaches 200lm/w. The luminous efficiency of the high-pressure sodium lamp increases with the increase of power. Therefore, the overall efficacy LED lamp is stronger than the high-pressure sodium lamp.

Third, high color rendering
The color rendering of LED lamps is much higher than that of high-pressure sodium lamps. The color rendering index of high-pressure sodium lamps is only about 23, and the color rendering index of LED lamps reaches 70 or more. From the perspective of visual psychology, the same brightness can be achieved, and the illuminance of LED lamps can be higher than that of high voltage. The sodium lamp has been reduced.

Fourth, the light decay is small
The light decay of LED lights is small, the light decay of less than 3% in one year, and the high-pressure sodium light decays, which has dropped by more than 30% in a year or so. Therefore, the design of LED lamps can be lower than that of high-pressure sodium lamps.

Five, energy saving
The LED lamp has an automatic control energy-saving device, which can achieve the maximum possible power reduction and save energy in meeting the lighting requirements of different time periods. Use is relatively safe. LEDs are low-voltage devices that drive a single LED with a safe voltage. The series has a single power of 1 watt, so it is a safer power source than a high-voltage power supply, making it ideal for use in public places.

Six, easy to maintain
Each unit LED chip has a small volume, so it can be fabricated into a variety of shapes and suitable for a variable environment.

 

information about 100w Led Flood light : https://www.xiangruilight.com/product/flood-light-mars-series/100w-outdoor-slim-led-floodlight-ip65-mars-series.html

0 votes

LED floodlights are common products of the current types of lamps, and their use environment is also very diverse. The advantages of LED floodlights are many, so today, manufacturers will share the LED floodlights. One advantage.

1, the lamp body is very small
The LED lamp is a small, very fine LED chip packaged in a transparent epoxy resin, so it is very small, very lightweight, saving a lot of materials and space in production and application.

2, energy consumption is very low
It consumes no more than 0.1W of electricity, consumes more than 90% less energy than incandescent lamps of the same efficacy, and more than 70% less than energy-saving lamps. Therefore, only LED is a true energy-saving light source!

3, sturdy and durable
The LED wafer is completely encapsulated in epoxy. The small epoxy resin particles are extremely difficult to break, and the entire lamp body has no loose parts; the inner wafer is extremely difficult to break, and there is little thermal effect, which may volatilize and melt. These characteristics make the LED difficult to damage. Compared with ordinary light bulbs, fluorescent lamps and LEDs can be said to be solid and sturdy, and they are numerous and durable.

4, LED lamp has a long service life
At the right current and voltage, the life of the LED lamp can reach 100,000 hours, which means that the product life is theoretically more than 10 years, which has a longer service life than other types of lamps.

5, a wide range of applications
Due to its small size, each unit LED chip is 3~5mm square or round, so it is more suitable for the preparation of devices with complicated modeling process. For example, the manufacture of soft, flexible tubes, strips, and shaped lights is currently only suitable for LEDs.

6, more colorful
In the past, the color of the lamps on the market was very simple. To achieve the purpose of color, one was to paint or cover the colored surface on the surface of the lamp, and the other was to charge the lamp with inert gas, so the richness of color was limited. LED is digital control, the light-emitting chip can now emit a variety of colors, including red, green, blue three-color, it is with this three-color, through the system control, you can restore the colorful world of the world.

7, less heat dissipation
LED is a more advanced cold light source. It does not radiate a lot of infrared rays and ultraviolet rays like incandescent lamps and fluorescent lamps. It is especially suitable for the illumination of valuables such as cultural relics, jewellery and high-end cosmetics. There is almost no current thermal effect like an incandescent lamp, and it is not subject to thermal expansion and contraction and frothing. It will not make the bulb yellow, will not accelerate the aging of the luminaire, and will not constitute a greenhouse effect on the surrounding environment.

information about 200w Led Flood light : https://www.xiangruilight.com/product/flood-light-mars-series/high-power-200w-outdoor-slim-led-floodlight-ip65-mars-series.html

0 votes

Some owners will choose the use of square floodlights when decorating the house, which not only provides related auxiliary functions for lighting, but also plays a certain role in modifying the overall beauty of the room. The square floodlights that have just been bought are bright and sleek. After a period of use, it will be dirty if you don't care for the floodlights. The Led High bay manufacturer will teach you how to maintain the square floodlights?

When the floodlights were just bought back, many owners may be anxious to install them. In fact, the most important step is not to install, but to carefully check the installation instructions of the purchased lamps to understand the relevant installation process. Also check to see if all the parts of the floodlights are complete and there are no dangers during the installation process.

After using the floodlight for a period of time, the brightness may be affected. If the normal use has been affected, the appropriate light source parameter lamp should be replaced in time. In particular, the lamp often flickers or has a black shadow. At this time, it is necessary to replace the lamp in time, the main purpose is to prevent serious burnout accidents.

The next thing to say is that when cleaning the square floodlights, do not change the structure of the fixtures. Do not modify the position of any ones yourself. All parts should be installed in the original position in the future. In order not to affect the normal use of the lamp, it is best to let professional maintenance personnel clean it for you.

In addition to the above maintenance methods, the reduced number of square floodlight switches will increase their service life. When the switch is turned on, the lamp current will be greater than the current at the time of operation. At this time, the temperature will increase, which will reduce the life of the lamp.

 

information about Led High bay : https://www.xiangruilight.com/product/led-highbay/

0 votes

Street lights are the facilities that will be provided on every city road, and the street lamp head is one of the important parts of the street lamp. The following is the 200w Led Flood light manufacturer to explain why the quality lamp is installed.

1, high brightness
The role of street lamps is to provide illumination for everyone in the dark, not only to play the role of urban nighttime lighting, but also to effectively reduce the chance of traffic accidents at night. However, if the brightness of the street lamp head is not enough, then the traffic participants at night will still be unclear and will not play their due role. The high-quality lamp heads are used for higher brightness and can meet the luminous needs of night lighting.

2, stable light
If the illumination provided by the street lamp is very unstable, it will not only cause visual impact to the night traffic participants, but also easily lead to short-circuit and other failures. The high-quality lamp head adopts a good light source material, which can keep the brightness stable without being flickering after use. Therefore, many places will know the reputation of the lamp head when installing the street lamp, and purchase from high-quality manufacturers. The stable lamp head is installed.

3, power saving
For municipal expenditures, the power consumption of street lamps is a big expense, because many roads in the city need to install a large number of street lamps to use. If the node is not good, the electricity cost will be high. The high-quality street lamp head uses advanced energy-saving technology, which can make full use of the power supply and increase the brightness by other means, thus saving the municipality a certain amount of electricity.

information about 200w Led Flood light : https://www.xiangruilight.com/product/flood-light-mars-series/high-power-200w-outdoor-slim-led-floodlight-ip65-mars-series.html

...