top button

200w Led Flood Light Manufacturers Share The Characteristics Of Floodlights

0 votes
11 views

In life, we often use floodlights because it is one of the common fixtures. What does that mean? Let's take a look at the floodlight characteristics of today's 200w Led Flood light manufacturer:

1. Energy saving and environmental protection: Floodlights use solid amalgam, which is a material that does not pollute the environment. Most can be recycled. Floodlights save about 75% of electricity compared to ordinary incandescent lamps. It is an absolutely healthy, environmentally friendly and energy efficient product.

2. No flash frequency: The floodlight has a high working frequency, which will not cause eye fatigue and effectively protect eyesight.

3. Good color rendering: The color value of the floodlight is greater than 80, the light is softer, and the surface of the object is soft and natural.

3. No need to warm up: the floodlight can be started and restarted immediately. The switch does not exhibit light decay in a common electrode discharge lamp, and has a long service life.

4. The floodlight installation is simple and convenient, and can be installed and used in various occasions with limited restrictions.

 

information about 200w Led Flood light : https://www.xiangruilight.com/product/flood-light-mars-series/high-power-200w-outdoor-slim-led-floodlight-ip65-mars-series.html

posted Jul 13 by Beta Cpc

  Promote This Blog
Facebook Share Button Twitter Share Button Google+ Share Button LinkedIn Share Button Multiple Social Share Button

Related Blogs
0 votes

LED floodlights are common products of the current types of lamps, and their use environment is also very diverse. The advantages of LED floodlights are many, so today, manufacturers will share the LED floodlights. One advantage.

1, the lamp body is very small
The LED lamp is a small, very fine LED chip packaged in a transparent epoxy resin, so it is very small, very lightweight, saving a lot of materials and space in production and application.

2, energy consumption is very low
It consumes no more than 0.1W of electricity, consumes more than 90% less energy than incandescent lamps of the same efficacy, and more than 70% less than energy-saving lamps. Therefore, only LED is a true energy-saving light source!

3, sturdy and durable
The LED wafer is completely encapsulated in epoxy. The small epoxy resin particles are extremely difficult to break, and the entire lamp body has no loose parts; the inner wafer is extremely difficult to break, and there is little thermal effect, which may volatilize and melt. These characteristics make the LED difficult to damage. Compared with ordinary light bulbs, fluorescent lamps and LEDs can be said to be solid and sturdy, and they are numerous and durable.

4, LED lamp has a long service life
At the right current and voltage, the life of the LED lamp can reach 100,000 hours, which means that the product life is theoretically more than 10 years, which has a longer service life than other types of lamps.

5, a wide range of applications
Due to its small size, each unit LED chip is 3~5mm square or round, so it is more suitable for the preparation of devices with complicated modeling process. For example, the manufacture of soft, flexible tubes, strips, and shaped lights is currently only suitable for LEDs.

6, more colorful
In the past, the color of the lamps on the market was very simple. To achieve the purpose of color, one was to paint or cover the colored surface on the surface of the lamp, and the other was to charge the lamp with inert gas, so the richness of color was limited. LED is digital control, the light-emitting chip can now emit a variety of colors, including red, green, blue three-color, it is with this three-color, through the system control, you can restore the colorful world of the world.

7, less heat dissipation
LED is a more advanced cold light source. It does not radiate a lot of infrared rays and ultraviolet rays like incandescent lamps and fluorescent lamps. It is especially suitable for the illumination of valuables such as cultural relics, jewellery and high-end cosmetics. There is almost no current thermal effect like an incandescent lamp, and it is not subject to thermal expansion and contraction and frothing. It will not make the bulb yellow, will not accelerate the aging of the luminaire, and will not constitute a greenhouse effect on the surrounding environment.

information about 200w Led Flood light : https://www.xiangruilight.com/product/flood-light-mars-series/high-power-200w-outdoor-slim-led-floodlight-ip65-mars-series.html

0 votes

From the aspect of health, the price of products designed with non-toxic materials is high, especially for outdoor led lights. Don't use cheap led lights with odor. So how do you choose the right LED floodlights? Let's take a look at the manufacturers to see what you need to pay attention to.

1, led brightness is different, the price is different. The led for LED lamps should be suitable for the laser class I standard.
2, strong anti-static ability led, long life, and therefore high prices. Generally, LEDs with antistatic greater than 700v can be used for led lighting.
3. The LED with the same wavelength has the same color. If the color is consistent, the price is high. It is difficult for manufacturers without led spectrophotometers to produce pure color products.
4. Leakage current led is a unidirectional conductive illuminator. If there is reverse current, it is called leakage, and LED with large leakage current has short life and low price.
5, the lighting angle of the use of different LEDs, the light angle is not the same. The specific illuminating angle is higher in price.
6. The key to different quality of life is life, and life is determined by light decay. Low light decay, long life and high price.
7. The illuminator of the led device is a wafer, and the price of the wafer varies greatly. The chips in Japan and the United States are relatively expensive. Generally, the price of wafers in Taiwan is lower than that in Japan and the United States, and the lowest in China.
8. Wafer Size The size of the wafer is expressed by the side length. The quality of the large wafer led is better than that of the small wafer. The price is proportional to the size of the wafer.
9, colloidal ordinary led colloid is generally epoxy resin, plus the anti-ultraviolet and fire retardant led price is more expensive, high-quality outdoor led lighting should be resistant to UV and fire.

 

information about 100w Led Flood light : https://www.xiangruilight.com/product/flood-light-mars-series/100w-outdoor-slim-led-floodlight-ip65-mars-series.html

0 votes

Today, 200w Led Flood light manufacturers share the right design for outdoor lighting.

Many people think that the brighter the outdoor lighting, the better the outdoor lighting. But in fact, it's not. The light that highlights trees, shrubs, and flower beds is not as much as you think, with a maximum of 1000 lumens. Larger luminaires with brighter outputs are more suitable for illuminating the entrance or the entire lawn.

Be sure to evenly separate the lights, not too far and not too close. Installing the light too far can result in dark areas and shadows throughout the lighting design. Putting them too close can result in unnecessary glare and over-bright areas. Uniform illumination is not only important in aesthetics, but also in terms of safety. Bright or dark spots or high contrast areas may make nights harder to see, especially the camera.

If you use the remote control on an LED floodlight, you may encounter some problems that will always work perfectly. Radio frequency (RF) remotes can be operated from walls and furniture, but if they are at the same frequency as nearby electronic equipment, they can be disturbed. Infrared (IR) remotes do not have to deal with electrical interference, but they do not work through the wall and must have a line of sight with the luminaire.

information about 200w Led Flood light : https://www.xiangruilight.com/product/flood-light-mars-series/high-power-200w-outdoor-slim-led-floodlight-ip65-mars-series.html

0 votes

Today, manufacturers share what is a high-power LED floodlight?
First, high power LED floodlight material
1. The main heat dissipating component of the lamp is ultra-high thermal conductivity aluminum material. The heat dissipation is preferably a scale type or a copper column type or a high stability long life fan.

2. The use of high light transmission, high refractive optical glass lens, effectively improve the reflectivity, and ensure the luminous flux output, efficient and reasonable light distribution technology.

3. High-strength tempered glass, with special processing, has better light transmission and UV resistance.

4. Stable rectification, constant current drive LED power supply, instantaneous drive, power factor above 0.96 makes the power supply more efficient, 50,000 hours of operation without failure.

5. Using high-performance integrated LEDs of 10 watts or more or multiple LEDs of more than 1 watt, the integrated LED is used to reduce the cost, and multiple light beads are used for the light effect.

6. With red, green, blue, yellow, white and other colors

7. LED green and pollution-free: cold light source design, no heat radiation, no harm to the eyes and skin.

8. Humanized structure design, lighting installation and maintenance is easier. The mounting angle can be adjusted between -45°~75°, suitable for a variety of installation methods.

Second, the use of high-power LED floodlights

Mainly used for tunnel lighting, outdoor flood lighting, architectural decorative lighting, industrial lighting, sports centers and outdoor stadiums, ports, terminals, etc.

 

information about 100w Led Flood light : https://www.xiangruilight.com/product/flood-light-mars-series/100w-outdoor-slim-led-floodlight-ip65-mars-series.html

0 votes

Street lights are the facilities that will be provided on every city road, and the street lamp head is one of the important parts of the street lamp. The following is the 200w Led Flood light manufacturer to explain why the quality lamp is installed.

1, high brightness
The role of street lamps is to provide illumination for everyone in the dark, not only to play the role of urban nighttime lighting, but also to effectively reduce the chance of traffic accidents at night. However, if the brightness of the street lamp head is not enough, then the traffic participants at night will still be unclear and will not play their due role. The high-quality lamp heads are used for higher brightness and can meet the luminous needs of night lighting.

2, stable light
If the illumination provided by the street lamp is very unstable, it will not only cause visual impact to the night traffic participants, but also easily lead to short-circuit and other failures. The high-quality lamp head adopts a good light source material, which can keep the brightness stable without being flickering after use. Therefore, many places will know the reputation of the lamp head when installing the street lamp, and purchase from high-quality manufacturers. The stable lamp head is installed.

3, power saving
For municipal expenditures, the power consumption of street lamps is a big expense, because many roads in the city need to install a large number of street lamps to use. If the node is not good, the electricity cost will be high. The high-quality street lamp head uses advanced energy-saving technology, which can make full use of the power supply and increase the brightness by other means, thus saving the municipality a certain amount of electricity.

information about 200w Led Flood light : https://www.xiangruilight.com/product/flood-light-mars-series/high-power-200w-outdoor-slim-led-floodlight-ip65-mars-series.html

...