top button

100w Led Flood Light Has Low Energy Consumption

0 votes

The LED flood light makes the illuminator that specifies the illumination on the illuminated surface higher than the surrounding environment, also known as the spotlight. Typically, it can be aimed in any direction and has structures that are unaffected by climatic conditions. Mainly used for large-area mines, building outlines, stadiums, overpasses, monuments, parks and flower beds. Therefore, almost all large-area lighting fixtures used outdoors can be regarded as spotlights. LED light source integrated technology, according to the characteristics of LED semiconductor light, clever circuit design and unique lighting geometric appearance make Led spotlights more than 80% power saving, truly achieving high efficiency and energy saving. The long service life is more than 50,000 hours, and it can be used well in various special environments, such as low temperature and high temperature. The utility model solves the problem that the semiconductor electric light source has low power and insufficient brightness in the field of illumination, and exhibits excellent super high brightness characteristics.

In general, 100w Led Flood light is a high-power LED floodlight with a distance of 100 meters and an illumination range of 120 degrees. It has a waterproof power supply, high thermal conductivity, low energy consumption, environmental protection, high brightness and high luminous efficiency. , there will be no advantages such as high temperature accumulation and stable performance.


information about 100w Led Flood light :

posted May 30, 2019 by Beta Cpc

  Promote This Blog
Facebook Share Button Twitter Share Button Google+ Share Button LinkedIn Share Button Multiple Social Share Button

Related Blogs
0 votes

A floodlight is a point source that can be uniformly illuminated in all directions. Its illumination range can be adjusted arbitrarily and appears as a regular octahedral icon in the scene. Floodlights are one of the most widely used sources in renderings, and standard floodlights are used to illuminate the entire scene.

Multiple floodlights can be applied to the scene. In order to produce a better effect, the shooting light bulb is loaded into a large reflecting umbrella for use as a high-intensity diffusing light source. Although it is indispensable for lighting in the shed, it can be regarded as one of the light sources with good illumination for general amateur indoor photography.

Use of 200w Led Flood light :
Mainly used for tunnel lighting, outdoor flood lighting, architectural decorative lighting, industrial lighting, sports centers and outdoor stadiums, ports, docks, etc.


information about 200w Led Flood light :

0 votes

Led floodlights are a special type of lamps with excellent heat dissipation. They are often used in industry. LED floodlights not only have good lighting effects, high light collection, but also very Environmental protection, the light source is very pure, to ensure people safe work.

1, led floodlights are durable and have a long service life. Daqi Optoelectronics' LED floodlights use high-quality aluminum for the production of the lamp housing. The performance of all aspects is relatively stable. Its surface is treated with precision paint, and it does not change color for a long time.

2, led floodlights have a certain degree of explosion-proof performance. Taking into account the particularity of the location where the lamps are used, we used a special structural design when making led floodlights, and used tempered glass to make the lampshade of the lamp, plus the process of die-casting, making led The performance of the finished products of the floodlight is relatively stable, it is very convenient to use and has a high safety factor.

3, led floodlights have high light efficiency, good environmental performance, and a longer service life.

4, led floodlights are easy to use. Our LED floodlights have high luminous efficiency and good environmental performance.

5, There are many specifications for led floodlights, such as 200w led floodlights, 400w Led Flood light, 100w led floodlights, etc.

information about 400w Led Flood light :

0 votes

Today, with the manufacturer, what are the advantages of LED lamps better than high-pressure sodium lamps?

First, unidirectional light
The characteristics of the LED lamp itself - the unidirectional nature of light, without the diffusion of light, to ensure light efficiency.

Second, high light efficiency
The LED lamp has a unique secondary optical design that illuminates the area of ​​the desired illumination with the LED light, further improving the illumination efficiency. Energy saving has been achieved. At present, the light source efficiency of LED has reached 100lm/w, and there is still a lot of room for development, the theoretical value reaches 200lm/w. The luminous efficiency of the high-pressure sodium lamp increases with the increase of power. Therefore, the overall efficacy LED lamp is stronger than the high-pressure sodium lamp.

Third, high color rendering
The color rendering of LED lamps is much higher than that of high-pressure sodium lamps. The color rendering index of high-pressure sodium lamps is only about 23, and the color rendering index of LED lamps reaches 70 or more. From the perspective of visual psychology, the same brightness can be achieved, and the illuminance of LED lamps can be higher than that of high voltage. The sodium lamp has been reduced.

Fourth, the light decay is small
The light decay of LED lights is small, the light decay of less than 3% in one year, and the high-pressure sodium light decays, which has dropped by more than 30% in a year or so. Therefore, the design of LED lamps can be lower than that of high-pressure sodium lamps.

Five, energy saving
The LED lamp has an automatic control energy-saving device, which can achieve the maximum possible power reduction and save energy in meeting the lighting requirements of different time periods. Use is relatively safe. LEDs are low-voltage devices that drive a single LED with a safe voltage. The series has a single power of 1 watt, so it is a safer power source than a high-voltage power supply, making it ideal for use in public places.

Six, easy to maintain
Each unit LED chip has a small volume, so it can be fabricated into a variety of shapes and suitable for a variable environment.


information about 100w Led Flood light :

0 votes

Most people now take care of this problem when purchasing LED floodlights, because only when the maintenance work is done, can the LED floodlights last longer. So how does the 200w Led Flood light manufacturer share the maintenance of the floodlights?

1. The luminaire is not used in a humid environment and will affect the life.

2. At the same time, it is not possible to use a wet rag to wipe the luminaire to prevent conduction or rust. The dust can be cleaned with feather dusters.

3. For grounded luminaires, check the grounding conditions and make regular inspections.

4. If the luminaire is damaged, timely repairs should be taken care of the surrounding environment, to ensure that repairs are carried out in a safe environment.

5. The hygiene of the lamps needs to be cleaned regularly and checked regularly every month.

6. When the fault occurs, pay attention to cut off the power in time and continue to run.

information about 200w Led Flood light :

0 votes

toxic materials is high, especially for outdoor led lights. Don't use cheap led lights with odor. At present, only a few LED manufacturers use non-toxic materials to produce. The method of identification can be directly used for the nose, and the products with odor are much lower than the price without odor. Toxins like lead, mercury, and cadmium require professional analysis. From the perspective of applicable environmental safety, there is a reliable dustproof and moisture-proof design, and the price of led products for fireproof, ultraviolet protection and low temperature cracking is high.

Now teach everyone how to choose the 400w Led Flood light. There are several places to note:
1, led brightness is different, the price is different. The led for LED lamps should be suitable for the laser class I standard.

2, strong anti-static ability led, long life, and therefore high prices.

3. The LED with the same wavelength has the same color. If the color is consistent, the price is high. It is difficult for manufacturers without led spectrophotometers to produce pure color products.

4. Leakage current led is a unidirectional conductive illuminator. If there is reverse current, it is called leakage, and LED with large leakage current has short life and low price.

5, the lighting angle of the use of different LEDs, the light angle is not the same. The specific illuminating angle is higher in price.

6. The key to different quality of life is life, and life is determined by light decay. Low light decay, long life and high price.

7. Wafer Size The size of the wafer is expressed by the side length. The quality of the large wafer led is better than that of the small wafer. The price is proportional to the size of the wafer.

8, colloidal ordinary led colloid is generally epoxy resin, plus the anti-ultraviolet and fire retardant led price is more expensive, high-quality outdoor led lighting should be resistant to UV and fire.

information about 400w Led Flood light :